|
Post by James on Jun 29, 2019 22:38:18 GMT
So I have the Annex and the XL tent. According to the information I can find, it looks like for the annex to sit at the proper height IT LOOKS LIKE 80 inches is the proper height , however I have seen 85" according to Jeep Website . So you need to raise tent 8" above stock (or 13") . Post length should then be 28 or 30 (41/43) inches for full extension and retraction , which I am thinking of cutting 2x2 holes in the fender to have the posts lower down through them. To cleat the wheel, the tent need to slide over 14 inches - maybe use a 600-650mm actuator .
Anyone successfully tackle this issue yet?
|
|
|
Post by Admin on Jul 24, 2019 5:09:54 GMT
So I have the Annex and the XL tent. According to the information I can find, it looks like for the annex to sit at the proper height IT LOOKS LIKE 80 inches is the proper height , however I have seen 85" according to Jeep Website . So you need to raise tent 8" above stock (or 13") . Post length should then be 28 or 30 (41/43) inches for full extension and retraction , which I am thinking of cutting 2x2 holes in the fender to have the posts lower down through them. To cleat the wheel, the tent need to slide over 14 inches - maybe use a 600-650mm actuator . Anyone successfully tackle this issue yet? Here is what we are working on to solve this problem. Will have it out next weekend so we will see how it works...
|
|